Licensed builder BLD 339869 · Adelaide
The wall removal process, step by step
What happens before, during and after a wall comes out or a new doorway goes in, so you know what to expect and what to get ready.
A non-structural wall skips the engineering and approval. A load-bearing wall goes through every step below.
Shannon and his small team quote and build every job themselves. No salespeople.

Get a free wall removal quote
Goes straight to Shannon, the licensed builder who'll quote and do the work.
- Free quote and site visit
- Engineer and approval arranged
- Patch repairs included
Prefer to talk? Call Shannon on 0412 540 269
5.0 12 Google reviews
- LicensedBLD 339869
- Since 2009in the trade
- Since 2009Shannon's years building in Adelaide
- 5.0 12 Google reviews of Bella Carpentry
- Licensed builderLicence BLD 339869 (check on the CBS register)
- SA owned & operatedBased in Unley, ABN 28 995 562 727
Step 1
The site visit: four things Shannon checks
Everything about the job, from the price to whether you need approval, comes out of this visit.
What's above it
Ceiling joists, roof framing, another wall or an upper floor. This tells us whether the wall is load-bearing, and what the beam or lintel will have to carry.
What's inside it
Power points, switches, plumbing, gas and ducting. Each one has to be moved by a licensed trade, and each one adds to the cost.
What it's made of
Plasterboard on timber studs, older lath and plaster, or single or double brick. It changes the propping, the dust and how much waste comes out.
What's under it
Floorboards, slab or tiles, and whether the flooring runs under the wall or stops at it. That decides how the floor gets patched afterwards.
You get a written quote afterwards.
Step 2 (load-bearing walls)
Engineering and building consent
When a wall holds something up, its load has to go somewhere else once it is gone. A structural engineer designs the beam or lintel that takes over, what it is made of, and the posts or piers that carry the load down to the ground at each end. Sometimes that means new footings.
With the engineer's design, we prepare and lodge the building consent application through PlanSA. The wall can't come out until consent is granted.
A non-structural wall usually skips this step. Heritage-listed homes can need approval even for internal changes, so it is worth checking your property on PlanSA.

Step 3
Getting your home ready
A few things you can do before the team arrives make the day go faster and keep the mess down:
- Clear the room the wall is in, and the room on the other side, as far back as you can.
- Take pictures and ornaments off the walls nearby. Cutting into a wall shakes the ones around it.
- Turn off ducted heating or cooling while the work is on, so dust is not pushed through the house.
- Leave room in the driveway or on the street for a ute, materials and a skip or trailer.
- Plan for pets and kids. The work area is a building site until the opening is finished.
- Expect the power to be off for part of the day while the electrician works.
Step 4
On the day
- Protection. Floors are covered and dust screens go up around the work area.
- Services made safe. The electrician, and plumber if needed, disconnect anything in the wall.
- Props. For a load-bearing wall, temporary props go in on both sides to hold the ceiling or roof before anything is cut.
- The wall comes out. Linings, frame or bricks are removed and the waste is taken away.
- The beam or lintel goes in. It is bedded on its supports at each end, and the props come out once it is carrying the load.

Step 5
Making good
A new opening leaves raw edges to fix: the plaster or render around the opening, the ceiling where the beam went in, and the floor where the wall stood. Patch repairs are included in the quote, with architraves or a door frame fitted if the opening needs them.
The floor is the one to think about early. Timber boards can be patched, tiles rarely match, and carpet can be joined. If you were planning new flooring anyway, now is the time.
Repainting and new flooring are extras you can add, priced upfront. Then the site is cleaned.
What Shannon's customers say
5.0from 12 Google reviews of Bella Carpentry
Shannon and the team at Bella Carpentry were able to remove a wall for me on short notice and completed the work to a high standard. They got the job done quickly with attention to detail.and I would happily use them again.
Thanks Shannon and team turning a dilapidated stable into an amazing outdoor studio. Couldn't have done it without his skill and expertise. He took our tight timeline and performed some magic. Thanks Shannon.
Shannon built our pergola. Quality build, looks good, fair pricing. Shannon clearly has plenty of experience so his advice to any of our questions was spot on.
Bella Carpentry ( AIH constructions ) did some deck repairs for me this week. I have no hesitation in highly recommending Shannon and his team, and I will definitely be utilising their services again in the future.
Check us before you hire
Anyone can say they're licensed. Here's how to check Wall Removal Specialists Adelaide yourself, using South Australian and Australian Government records.
Licensed builder: BLD 339869
Building work in South Australia has to be done by a builder licensed with Consumer and Business Services (CBS). Search our number on the CBS licence holder register.
Registered business: ABN 28 995 562 727
Wall Removal Specialists Adelaide is a trading name of The Trustee for Ursino Family Trust, which also trades as Bella Carpentry. See it on ABN Lookup.
Building indemnity insurance
In SA, domestic building work of $20,000 or more that needs development approval must be covered by building indemnity insurance, taken out by the builder before work starts (SA Government guide).
Prices you can plan with
We publish guide prices and explain what moves them, so the quote isn't a surprise. See the wall removal guide prices.
5.0 from 12 Google reviews
Shannon's reviews sit on the Bella Carpentry Google profile. The photos on this site are from Bella jobs, not stock images.
A local business you can call
Based in Unley SA 5061, open Mon - Fri: 9:00am - 5:00pm. Call 0412 540 269 or email hello@wallremovalspecialistsadelaide.com.au.
Questions about the process
Can I stay at home while the work is done?
Usually, yes. The work area is closed off with dust screens and the rest of the house stays usable, but it is noisy during work hours and the power may be off for part of the day.
How much dust is there?
Some dust always escapes, especially with brick and old plaster. Dust screens, floor protection and turning off ducted heating or cooling keep most of it in the work area, and the clean-up is part of the job.
What happens to the floor under a new opening?
Where the wall stood there is a strip with no flooring, or different flooring. Timber boards can be patched with matching boards, but new boards may look different until they are sanded and finished with the rest. Tiles are hard to match. For a wide opening, many people lay new flooring through both rooms.
Who moves the power points and plumbing?
Licensed electricians and plumbers. We arrange them as part of the job, and their work is listed in the quote.
Is painting included?
Patch repairs to the ceiling, wall ends and floor are included as standard. Repainting is an extra you can add, priced upfront, because most people want the whole room painted rather than just the patches.
Talk to Shannon about your wall
Tell us which wall you'd like removed, or the doorway, beam or lintel job, and roughly how old the house is. Shannon will come out, check what the wall is carrying and what runs through it, and give you a written quote.
- 0412 540 269
- hello@wallremovalspecialistsadelaide.com.au
- Mon - Fri: 9:00am - 5:00pm
- Based in Unley, working across Adelaide

Get a free wall removal quote
Goes straight to Shannon, the licensed builder who'll quote and do the work.
- Free quote and site visit
- Engineer and approval arranged
- Patch repairs included
Prefer to talk? Call Shannon on 0412 540 269
5.0 12 Google reviews
- LicensedBLD 339869
- Since 2009in the trade

